So far, I considered this just a nuisance, until a spammer sent an email entitled "16,000 Woodworking Plans and Projects", claiming to be from "Wood Gears", with the return email address of woodgears.ca@gmail.com (not my email address). The mailing address included was for 750 Hornby Street, Vancouver BC. Googling that, it's the address of the Vancouver art gallery. I doubt the art gallery has anything more to do with this scam than I do.
There is no doubt that many woodworkers can benefit from this package. Beginners will find these woodworking plans' clear and concise nature gives them a solid foundation to build their first projects as they build their confidence to move on to more complex carpentry projects and increase their skill level. Advanced and professional woodworkers will appreciate the huge variety of different projects and the time saving value of having a high quality set of plans waiting for virtually any challenge.
Your garden tools need a clean, dry, and accessible locale to keep safe from natures elements. A smart option is to build a handsome wood lean-to shed against the house near the patio or garden. If it's made from cedar, a naturally rot-resistant wood, it will weather nicely while protecting your goods from precipitation and insects alike. You can make one in a weekend out of off-the-shelf lumber or buy a panelized kit that screws ­together in under an hour.
The plan was presented in a simple and efficient way such that anybody can easily understand and implement what it contains. The producer was himself a trainer and a member of the Architectural Woodwork Institute. Thus, he has an advantage over other trainers. It is obvious that it is not easy for anybody who is not committed to the profession to come out with that fantastic plan. He devoted his time and effort to ensure that he developed the plan, which is currently the best that woodworkers can actually lay their hands on the market today.
Can you believe that this amazing wine rack the image below has been built using old wood pallets? Perhaps you can. Isn’t it wonderful that your old wood pallets can be reused to build something so beautiful and useful? I am not a drinker but I liked the idea so much that I just couldn’t resist making myself one. Although later I gifted it to my parents, who totally loved it.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Bellow you will see 23 Super Smart DIY Wooden Projects For Your Home Improvement. Wood in your home will add warmth, elegance and pleasant feeling. If you don’t want to make big structural changes, but you still want to change something in your interior design, this will be right solution. So, see our inspiring colection, and use your free time creatively. Have fun!
Ted's plans are actually a rather poor subset of what is available on the web for free. The actual number of plans in the package is less than 2500, nowhere near the claimed 16,000. There is a search box on the Ted's woodworking main page that allows you to search the plans, towards the bottom of the front page. Try typing in some random jumble of letters there and see what "results" come up. Further evidence of scam!
@Neil What is the use of repeating lessons when there is so much more to be learned? Technology has moved on from the adz. Plumbers use PEC, insulation is sprayed, glue-lams allow for open floor plans and furnaces are no longer stoked with coal. As for the new people, if these trades cannot attract fresh blood we will all be unable to get homes built and repairs made. I don't yearn for my first home with the leaky concrete block foundation, failing well pump and an oil furnace held up by the plenum. I'll take heat pumps, solar panels and PVC waste pipes any day.You can get all the sill plate repairs and flitch beams demos you need on YouTube.

All images and tutorials on this blog are copyrighted material.Please contact me if you would like to borrow any media (photos, video or audio files), tutorials, or ideas from this blog. 99% of the time I would be happy to allow you to use one photo with appropriate credit and link back to PrettyHandyGirl.com (preferably to the same post it was borrowed from.) I can be contacted via email: PrettyHandyGirl (at) gmail.com.


Teds Woodworking Plans contains more than 16,000 different diagrams and enables individuals who are new to woodwork, or are experienced in the craft, to develop their skills and new brand new techniques. The website's database is enormous, with many different videos, CAD software, blueprints, and diagrams, which can cater to a number of different demographics, no matter what their age or background.
Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.
Have you got an old whiskey barrel at home that you haven’t used for ages? If yes, this project is for you. You can make a really beautiful coffee table from that old whiskey barrel in a few easy steps. Apart from a coffee table, whiskey barrels can also be used to build several other furniture items. But that is a talk for later. Here, we will discuss how to make a coffee table from a whiskey barrel.
​Every project needs some tools and material to build on. The tools and material you will need in this plan include Miter saw, jigsaw, measuring tape screws and screwdriver etc. We will suggest you take high-quality material for the plan. Read the source tutorial and watch the video tutorial below for more details. Follow all the steps properly to make a nice and strong Rustic cooler. The tutorial explains the procedure for building this awesome gift. Make sure to use the only high-quality material for any woodworking project.
Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many
These 25 projects are absolutely stunning, to say the least. I would love to try out some of these designs all by myself and get started with some serious woodworking that I have been procrastinating for a long time. My favorites among these 25 are definitely the desk organizer, the bowling lane, and the tiered planter, but nevertheless, all are good in their own ways. I believe these projects only require hand tools and basic power tools like a rudimentary router and a jigsaw.
Call up your issuing credit card company that you used and tell them it was a scam and you never got the services you paid for. They will take the money back out of Toms woodworking merchent account. If they get enough of these complaints the credit card companies will drop them and they will not be allowed to accept cards any more. As an added bonus for each one of the complaints and refunds the percentage they pay per transaction goes up.
ClickBank is the retailer of products on this site. CLICKBANK® is a registered trademark of Click Sales, Inc., a Delaware corporation located at 917 S. Lusk Street, Suite 200, Boise Idaho, 83706, USA and used by permission. ClickBank's role as retailer does not constitute an endorsement, approval or review of these products or any claim, statement or opinion used in promotion of these products.
If you are a beginner or have done some woodworking you will find these plans easy-to-follow as the instructions are very clearly written. The woodworking plans are straightforward so they are not complicated at all. Even if you are a total newcomer to woodworking you will simply be able to master all the techniques that are needed and the woodworking skills very quickly by following the concise and clear instructions.
Can you believe that this amazing wine rack the image below has been built using old wood pallets? Perhaps you can. Isn’t it wonderful that your old wood pallets can be reused to build something so beautiful and useful? I am not a drinker but I liked the idea so much that I just couldn’t resist making myself one. Although later I gifted it to my parents, who totally loved it.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
A woodworker's Workbench is a special type of bench designed to hold your work when you are working on a wood project. The main purpose of this table is to keep the woodwork steady and to prevent it from moving. Follow the tutorial below to build yourself a nice workbench suitable for your specific woodworking projects. Make sure to modify the table to fit your specific requirements.
Teds Woodworking is a simple solution to this problem. The ambitious project was started by Ted McGrath, the brains of Teds Woodworking. There are many questions raised about the hype around this gentleman but if one looks at his repertoire, it is more than enough to put these doubts to rest. Ted has been in the woodworking business for decades now and has garnered invaluable knowledge in the field of carpentry. Apart from being an educator and professional woodworker in the discipline, Ted McGrath is also a member of the Architectural Woodwork Institute, a mark of his true potential and credibility. With his experience in the field, Ted McGrath was responsible for collating all his knowledge in the field into a comprehensive guide for woodworking.
All users get a free DWG/CAD Plan Viewer. This tool provides you with the required means to view as well as measure DXF, DWG and DWF. Additionally, you also get XRef support which helps the user view block attributes as well layers. This makes it much easier to visualize your finished product even before it is done. The easy to use features also help users create their own projects and plans. So, once you feel you have got the drift of things, you can go well beyond the provided plans.

Ted’s Woodworking plans are not uniform in style. This is just a minor nit, but it would have been nice to have a uniform presentation style for all these plans. Also, the woodworking plans should have beginner, intermediate, and expert ratings. Instead, the plans are presented as is. A novice woodworker might have trouble with some of these plans.
Just make sure to use non-toxic wood and non-toxic finishes like Raw Linseed Oil or Carnauba Wax so that dangerous chemicals from other woods and finishes doesn’t contaminate the food that goes onto the cutting board. You can also opt to include an indent for the knife, so the chef can put the knife into the cutting board when the knife is not currently in use.
Building a Wooden Office Desk Organizer is an easy task for a professional woodworker, but not so much for normal people like you and me. But that doesn’t mean you cannot do this. Two years ago, I had almost no woodworking experience, but now I make most of my household and office wooden items by myself. This saves me a lot of money. And believe me when I say this; you can also manage to make wonderful wood items with a little practice and some woodworking experience.

I got this idea from a Pinterest post. The final product looks so beautiful that I just couldn’t wait to make one for myself. This was somewhat a different experience from my other regular DIY projects as it doesn’t involve making something from scratch, but turning an existing wood piece into another one. Nonetheless, I enjoyed it very much and the final product was very satisfying. The tutorial I used is linked below.
The obvious thing to do would be for the copyright holders to sue "Ted" to get him to stop selling these plans. But that would require the copyright holders to spend money on lawyers and some investigation to find out who "Ted" actually is. The actual address on "Ted's" website doesn't exist, and the image of Ted is a stock photo. Even if successfully sued by one copyright holder, "Ted" could just remove the offending plans and keep selling.
By video tutorial, you will get step by step process instructions of making a nice wooden folding sling chair from scratch. However, my first wooden chair was not the best one, but it was good enough to motivate me to make some more folding chairs like this one. If I can make this, you too can make one yourself. You can browse the internet for more folding sling chairs ideas and start making one now.

DoItYourself.com®, founded in 1995, is the leading independent home improvement and repair website. We welcome your comments and suggestions. All information is provided "AS IS." Website operating problems contact [email protected] Questions of a Do It Yourself nature should be submitted to our "DoItYourself.com Community Forums". Copyright © 1995-2018 MH Sub I, LLC dba Internet Brands. All rights reserved. You may freely link to this site, and use it for non-commercial use subject to our terms of use. View our Privacy Policy here.

@Neil What is the use of repeating lessons when there is so much more to be learned? Technology has moved on from the adz. Plumbers use PEC, insulation is sprayed, glue-lams allow for open floor plans and furnaces are no longer stoked with coal. As for the new people, if these trades cannot attract fresh blood we will all be unable to get homes built and repairs made. I don't yearn for my first home with the leaky concrete block foundation, failing well pump and an oil furnace held up by the plenum. I'll take heat pumps, solar panels and PVC waste pipes any day.You can get all the sill plate repairs and flitch beams demos you need on YouTube.

The best thing about this wine rack is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can modify your wine rack any way you want or build in a design or color different from this one. The basic steps to build a wooden wine rack are the same for all variants. I have included here the video tutorial that I followed in order to build myself a pallet wide rack.
A lot of woodworkers share their projects through their own blogs or YouTube channels. In fact, we’ve shared many of them here before, including, Woodworking for Mere Mortals, The Wood Whisperer, Matthias Wandel, April Wilkerson, Sawdust Girl, House of Wood, FixThisBuildThat, Pneumatic Addict, Build-Basic, Rogue Engineer, Her Tool Belt, and Ana White. The best YouTube woodworkers create great videos, but also provide a complete blog post with a cut list, tools, materials, and instructions. Find your favorites and save them for when you’re doing your searches.
Woodworkers are a social bunch, and there are a few popular forums where people share thoughts on tools, discuss technique at length, and—of course—upload their plans. Some of the most active online woodworking communities include Lumberjocks, Woodworking Talk, Wood Magazine, WoodNet, Kreg, and Sawmill Creek. Search those to see if they have what you’re looking for (either with their built-in search tool or with Google’s site-specific search, e.g. site:lumberjocks.com side table).
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
×