We have helped thousands of general and specialty contractors of all types build stronger, more profitable businesses. Sign up for our free newsletter and receive advice and encouragement for your business. We offer affordable DVD training in estimating, sales and business management, along with estimating and proposal writing software that doesn’t cost an arm and a leg. Free Online Catalog for US addresses only.
We have helped thousands of general and specialty contractors of all types build stronger, more profitable businesses. Sign up for our free newsletter and receive advice and encouragement for your business. We offer affordable DVD training in estimating, sales and business management, along with estimating and proposal writing software that doesn’t cost an arm and a leg. Free Online Catalog for US addresses only.
The best thing about this wine rack is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can modify your wine rack any way you want or build in a design or color different from this one. The basic steps to build a wooden wine rack are the same for all variants. I have included here the video tutorial that I followed in order to build myself a pallet wide rack.
Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many

Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.

With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Nobody says you have to build your own porch swing. You could buy one, costing hundreds of dollars. But wait. Why not make it yourself and save some cash? Were you crafty enough, you could start from scratch... But let's also say you're willing to hit the halfway mark between scratch-built and store-bought. For this building project, we selected a 5-foot-long swing made of solid teak. No cutting is needed, so assembly takes only a few hours. And the effort is doubly repaid: in savings and in satisfaction.
The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.

Hi Liz. I am sorry you were having trouble unsubscribing to the newsletter. Your information has been updated. Your email address has been removed from our Woodworkers Guild of America E-Newsletter mailing list. Please allow up to 5 business days for your request to be completed. If you have any questions, please contact our customer service team at 1-855-253-0822.
As soon as I tried to start downloading the plans in the “members” area, I came across problem after problem. Most clicks just re-directed me back to the main page, or a page that had frequently asked questions. I immediately knew that this wasn’t something legit, so tried to file for their “Money Back Guarentee”. Of course, there is no phone number to call, only a digital form to fill out and they promise to get back to you in 3-4 business days. I filed several tickets, and am still waiting to here back from Ted.
Teds Woodworking is a simple solution to this problem. The ambitious project was started by Ted McGrath, the brains of Teds Woodworking. There are many questions raised about the hype around this gentleman but if one looks at his repertoire, it is more than enough to put these doubts to rest. Ted has been in the woodworking business for decades now and has garnered invaluable knowledge in the field of carpentry. Apart from being an educator and professional woodworker in the discipline, Ted McGrath is also a member of the Architectural Woodwork Institute, a mark of his true potential and credibility. With his experience in the field, Ted McGrath was responsible for collating all his knowledge in the field into a comprehensive guide for woodworking.
Isn’t this amazing that instead of having to throw that old furniture piece away, you can now reuse it to build something even more beautiful? If you do not like this particular idea, there are many other re-purposeful furniture items you can build from an old dresser. Just search the internet for other DIY project ideas. Here is a link to the video tutorial that explains the same procedure in a more practical manner that you can easily follow through.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.

Free woodworking plans and easy free woodworking projects added and updated every day. Use our RSS feed to keep up-to-date on the latest free woodworking information. Free search access too! Organized by topic in alphabetical order. We were the first organized database of free woodworking plans online. Today, we still work for you to continue providing the most up to date database. First time here? Read About Us (link at bottom of page). Free woodworking plans to build quilt racks, gun cabinets, patios,picnic tables, kids furniture, toys and thousands more for beginners and all skill levels.

Another good thing about Ted’s Woodworking is it hаѕ designs fοr еνеrу need. Yουr home οr professional projects wіƖƖ ɡο qυісkеr than уου еνеr hаνе experienced before. What once wаѕ hard аnԁ complicated for you, wіƖƖ seem Ɩіkе magic wіth the custom blueprints аnԁ materials lists provided bу Ted McGrath. Wіth Ted’s Woodworking аѕ уουr guide, even complex projects wіƖƖ bе less expensive, more professionally done аnԁ the results wіƖƖ surpass even уουr expectations. Eνеrу job wіƖƖ bе a work οf art that уου саn take pride іn. Ted’s Woodworking wіƖƖ mаkе уου feel Ɩіkе a journeyman οr professional carpenter, bυt the real compliments wіƖƖ come frοm those who’ll see the аmаᴢіnɡ work уου hаνе achieved.


This is another example of small woodwork projects that require good time and woodworking skills. This item is built using multiple wooden parts. Each part is shaped in a specific design and then all parts are attached together to make the final TV set. I have never tried building this one, mostly because I don’t own an iPhone, but also because making this item is not an easy task. By the way, it works fine with all kinds of phones.
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
Cut the 6-1/2-in. x 3-in. lid from the leftover board, and slice the remaining piece into 1/4-in.-thick pieces for the sides and end of the box. Glue them around the plywood floor. Cut a rabbet on three sides of the lid so it fits snugly on the box and drill a 5/8-in. hole for a finger pull. Then just add a finish and you’ve got a beautiful, useful gift. If you don’t have time to make a gift this year, consider offering to do something for the person. You could offer to sharpen their knives! Here’s how.
If you are reading this than you are probably interested in Woodworking! And yes it can be the most fulfilling hobby you can ever have; if you know what you are doing. There are so many things you can build for your home and garden. Or if you are really good you’ll even get requests from friends and family to build the bookcase they always wanted or a cabinet for storage or a crib for the newborn baby. If you are creative and enjoy using your hands then woodworking can be very rewarding and even therapeutic. The problem is where to start if you never worked with woodworking before? 

You can transfer a graphic on any wood piece of your choice, including a frame, top of a table, etc. The surface should be clean and big enough for the graphic paper. I am also sharing a video tutorial here that explains in detail the process of transferring any graphic to a wooden surface using a freezer paper. Just gather the items you need and follow this video to carve your favorite designs on your favorite wood items.
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
×