With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
Your garden tools need a clean, dry, and accessible locale to keep safe from natures elements. A smart option is to build a handsome wood lean-to shed against the house near the patio or garden. If it's made from cedar, a naturally rot-resistant wood, it will weather nicely while protecting your goods from precipitation and insects alike. You can make one in a weekend out of off-the-shelf lumber or buy a panelized kit that screws ­together in under an hour.

The shelf in the first picture is made of red oak plywood. You can choose the wood type, color and design as you like for your project. In case if you need more help understanding this project, you can refer the source link below. It discusses various items used, steps and tips and personal experience of the author who personally built a Zigzag shelf.
Sure, you could plop a couple of deck chairs in your backyard for an impromptu sitting area. But a hand-built cedar bench, framed by an arbor, gives you a more permanent place to kick back as the weather warms up, and adds an elegant architectural feature. Our design incorporates classic touches such as profiled rafter tails, alternating wide and narrow boards for the seat and backrest, and trellis sides to let your favorite climbers ascend to the overhead structure. Or you can let the bench remain free of greenery—it's eye-catching enough on its own.
Ted’s Woodworking Plans contains over 16,000 detailed plans that are pre-made for wood projects that are suitable for all levels of woodworking hobbyists. There are various plans available in the program, from plans for tables and chairs to dressers and more complicated furniture and structures such as sheds, outdoor patios, gazebos and the like. The plans are detailed yet very easy to follow, which allows users, even beginner woodworkers, to build furniture by themselves.
Teds Woodworking is a simple solution to this problem. The ambitious project was started by Ted McGrath, the brains of Teds Woodworking. There are many questions raised about the hype around this gentleman but if one looks at his repertoire, it is more than enough to put these doubts to rest. Ted has been in the woodworking business for decades now and has garnered invaluable knowledge in the field of carpentry. Apart from being an educator and professional woodworker in the discipline, Ted McGrath is also a member of the Architectural Woodwork Institute, a mark of his true potential and credibility. With his experience in the field, Ted McGrath was responsible for collating all his knowledge in the field into a comprehensive guide for woodworking.
It might not be the easiest project in this list, but if you already have some experience with wood cutting and joinery, it won’t be any hassle at all. Thanks to the extremely detailed instructions it shouldn’t really be a problem even if you’re not very familiar with woodworking. This could actually be a great project for refining your woodworking skills as a beginner!
This rack can be built from old unused wood pallets you can find around the house. So it is also a great way to recycle those old pallets. You can also find a step by step tutorial at instructables.com for which I have included the source link below. This tutorial helps you to make a wood wine rack from the scratch. So what are waiting for? Just grab the items you need and start building a cool wooden rack for those nice wine bottles of yours.

​Every project needs some tools and material to build on. The tools and material you will need in this plan include Miter saw, jigsaw, measuring tape screws and screwdriver etc. We will suggest you take high-quality material for the plan. Read the source tutorial and watch the video tutorial below for more details. Follow all the steps properly to make a nice and strong Rustic cooler. The tutorial explains the procedure for building this awesome gift. Make sure to use the only high-quality material for any woodworking project.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of
The space behind a door is a storage spot that’s often overlooked. Build a set of shallow shelves and mount it to the wall behind your laundry room door. The materials are inexpensive. Measure the distance between the door hinge and the wall and subtract an inch. This is the maximum depth of the shelves. We used 1x4s for the sides, top and shelves. Screw the sides to the top. Then screw three 1×2 hanging strips to the sides: one top and bottom and one centered. Nail metal shelf standards to the sides. Complete the shelves by nailing a 1×2 trim piece to the sides and top. The 1×2 dresses up the shelf unit and keeps the shelves from falling off the shelf clips.
BOISE, Idaho, May 12, 2018 (GLOBE NEWSWIRE) -- TedsWoodworking.com has over 16,000 woodworking plans and projects. If you want to start a woodworking project, you need all the necessary information, including schematics, blueprints, material lists, dimensions etc. That is where TedsWoodworking comes in. The plans are clearly drawn and they're step-by-step explanations of how the plan should be done and put together.
The plan was presented in a simple and efficient way such that anybody can easily understand and implement what it contains. The producer was himself a trainer and a member of the Architectural Woodwork Institute. Thus, he has an advantage over other trainers. It is obvious that it is not easy for anybody who is not committed to the profession to come out with that fantastic plan. He devoted his time and effort to ensure that he developed the plan, which is currently the best that woodworkers can actually lay their hands on the market today.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
The logo suggests the consumer is buying a DVD filled with blueprints and videos for over 16,000 projects. A DVD would be a one-time purchase that can be referenced far into the future. In reality, the buyer only gets access to projects on Ted’s website for a limited amount of time unless they upsell to a monthly subscription. I’ve seen other complaints stating there are nowhere near 16,000 projects on the site, and all the plans and videos could be found elsewhere on the Internet for free or for purchase.
Who doesn’t want to have one awesome and handy wooden desk organizer that not only looks beautiful but can store all your mini office desk items properly? See the picture below. I am sure you will love this one. I have already built one myself as I just could not resist having one at my office. This thing easily stores all my office desk essentials, including pen, pencils, marker, small notebooks, etc. in the most organized way. You can see it yourself.
Some of these spams were forwarded to me by followers of my website. I noticed right away that the links in the email went thru redirects on MailChimp's servers. The email itself also originated from a MailChimp server (mail52.us1.mcsv.net 204.232.163.52). Because I also used MailChimp for my mailing list, my first thought was that my MailChimp account had been compromised. But on further investigation, I realized the spammer used a list different from my mailing list. But I changed my password just for good measure!
This particular tray is made using reclaimed barn wood but the author of the project Beyond The Picket Fence surprised everyone with one fact: reclaimed barn wood has often some areas turned pink due to cow urine. If you check the project more closely, you’ll also notice some areas of the tray being almost bright pink. That’s something you don’t see every day!
The logo suggests the consumer is buying a DVD filled with blueprints and videos for over 16,000 projects. A DVD would be a one-time purchase that can be referenced far into the future. In reality, the buyer only gets access to projects on Ted’s website for a limited amount of time unless they upsell to a monthly subscription. I’ve seen other complaints stating there are nowhere near 16,000 projects on the site, and all the plans and videos could be found elsewhere on the Internet for free or for purchase.
As soon as I tried to start downloading the plans in the “members” area, I came across problem after problem. Most clicks just re-directed me back to the main page, or a page that had frequently asked questions. I immediately knew that this wasn’t something legit, so tried to file for their “Money Back Guarentee”. Of course, there is no phone number to call, only a digital form to fill out and they promise to get back to you in 3-4 business days. I filed several tickets, and am still waiting to here back from Ted.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
This super-strong and simple-to-build workbench is may be the project you've been looking for a long time. You have to select some free workbench plans to create yourself a working table in your shed that after you can use it when you are working on your projects and maybe it can provide you some extra storage, depends upon which plan you are choosing to DIY.
Have you got an old whiskey barrel at home that you haven’t used for ages? If yes, this project is for you. You can make a really beautiful coffee table from that old whiskey barrel in a few easy steps. Apart from a coffee table, whiskey barrels can also be used to build several other furniture items. But that is a talk for later. Here, we will discuss how to make a coffee table from a whiskey barrel.

Cut off a 21-in.-long board for the shelves, rip it in the middle to make two shelves, and cut 45-degree bevels on the two long front edges with a router or table saw. Bevel the ends of the other board, cut dadoes, which are grooves cut into the wood with a router or a table saw with a dado blade, cross- wise (cut a dado on scrap and test-fit the shelves first!) and cut it into four narrower boards, two at 1-3/8 in. wide and two at 4 in.

×