A well-placed arbor is your garden's ultimate multitasker: It can serve as an entryway to an outdoor spot; frame a focal point, like a flowering shrub or garden shed; and, of course, take your beloved climbers to new heights. The go-to material for this project is rot-resistant cedar, though you can also make it from treated lumber. Whether left unfinished or given a coat of paint, you'll love how this piece adds personality to your outdoor space.


To corral shelf-dwelling books or DVDs that like to wander, cut 3/4-in.-thick hardwood pieces into 6-in. x 6-in. squares. Use a band saw or jigsaw to cut a slot along one edge (with the grain) that’s a smidgen wider than the shelf thickness. Stop the notch 3/4 in. from the other edge. Finish the bookend and slide it on the shelf. Want to build the shelves, too? We’ve got complete plans for great-looking shelves here.


Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.

×