The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
There is lawn furniture, and then there is what you might call landscape furniture—custom seating built right into the terrain. Done right, it can create a little oasis in your yard or even on your deck. Take, for instance, this bench with planters for piers. The entire structure is made from rot- and weather-resistant cedar lumber. It was built using lap joinery, a sturdy construction method meant to keep the planter walls from bowing against pressure from roots, should you decide to plant trees.
The plans range from simple items like basic tables and chairs to more artistic creations such as jigsaw puzzle tabletops, wooden animal centerpieces, plans for upcycled wooden palette furniture, wooden clocks, hidden storage, garage plans and even plans for working musical instruments like guitars. With basic woodworking know-how, anyone can come up with interesting wooden creations with these plans.
Having swing in your own home, yard or garden can be so de-stressing and be relaxing a thing to enjoy, that doesn’t matter you have a big yard or patio, or vacant porch. Kids will surely fall in love with this swing porch and love playing on a breezy day. Even, adults also do relax and enjoy a quite morning coffee, or just being embraced by the sun in the swing. 

Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
×