Some of these spams were forwarded to me by followers of my website. I noticed right away that the links in the email went thru redirects on MailChimp's servers. The email itself also originated from a MailChimp server (mail52.us1.mcsv.net 204.232.163.52). Because I also used MailChimp for my mailing list, my first thought was that my MailChimp account had been compromised. But on further investigation, I realized the spammer used a list different from my mailing list. But I changed my password just for good measure! 

Here, I am writing about another DIY project that involves the use of an old furniture piece. I think that the idea of reusing and recycling old furniture has got to me. Anyways, I am starting to love it. This project involves using an old door to build a beautiful multi picture frame, as you can see in the image below. This frame looks really wonderful and can be used to hold many pictures at a time.
Nobody says you have to build your own porch swing. You could buy one, costing hundreds of dollars. But wait. Why not make it yourself and save some cash? Were you crafty enough, you could start from scratch... But let's also say you're willing to hit the halfway mark between scratch-built and store-bought. For this building project, we selected a 5-foot-long swing made of solid teak. No cutting is needed, so assembly takes only a few hours. And the effort is doubly repaid: in savings and in satisfaction.
Hi Liz. I am sorry you were having trouble unsubscribing to the newsletter. Your information has been updated. Your email address has been removed from our Woodworkers Guild of America E-Newsletter mailing list. Please allow up to 5 business days for your request to be completed. If you have any questions, please contact our customer service team at 1-855-253-0822.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
×