Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.
The best strategy is to make sure that people new to the internet realize that Ted's Woodworking is fraud before they buy the plans, and to make sure they find legitimate sources of plans before they find Ted's. And this is where you could help. Ideally, when searching for "Woodworking plans", there would be many other pages that show up before Ted's. Pages with many links to them get ranked higher on Google. So the solution is to link to better sources of plans, such as my woodworking plans. Of course, I'd like my plans page to rank higher regardless, but that may be out of general self interest :)
Build this handy stool in one hour and park it in your closet. You can also use it as a step to reach the high shelf. All you need is a 4 x 4-ft. sheet of 3/4-in. plywood, wood glue and a handful of 8d finish nails. Cut the plywood pieces according to the illustration. Spread wood glue on the joints, then nail them together with 8d finish nails. First nail through the sides into the back. Then nail through the top into the sides and back. Finally, mark the location of the two shelves and nail through the sides into the shelves. Don’t have floor space to spare? Build these super simple wall-mounted shoe organizers instead!
×