Donald, from Louisiana, provides his review of Ted’s Woodworking Plans. He is an avid outdoorsman, and one hobby he has is building bird feeders. In the course of looking for bird feeder plans, Donald stumbled upon Teds Woodworking. This discovery motivated him to start building bigger and better woodworking projects, that he never would have contemplated doing before. It turned into a great hobby for Donald. He is pleased he purchased Ted’s Woodworking. If you want to pick up a great hobby, and learn some different woodworking designs, Donald highly suggests this program. You will get step-by-step videos, tutorials, and woodworking plan software. Whether its inside furniture, or outside wood structures, this is definitely the perfect woodworking program for the beginner.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.