The video explains the step by step process of making a nice wooden phone stand from scratch. My first wooden holder was not the best one, but it was good enough to motivate me to make more. I now possess 10 mobile wooden stands in different shapes and styles. And if I can make this, you too can make one yourself. Search the internet for more mobile holder ideas and start making one now.
The best strategy is to make sure that people new to the internet realize that Ted's Woodworking is fraud before they buy the plans, and to make sure they find legitimate sources of plans before they find Ted's. And this is where you could help. Ideally, when searching for "Woodworking plans", there would be many other pages that show up before Ted's. Pages with many links to them get ranked higher on Google. So the solution is to link to better sources of plans, such as my woodworking plans. Of course, I'd like my plans page to rank higher regardless, but that may be out of general self interest :)

It doesn’t really matter if you have been doing woodworking for years or if you’re still a complete newbie like myself, the fact is you can always use some easy woodworking plans, no matter what level you’re at. Following simple, step by step, and easy to read woodworking plans will make it much easier for you to complete projects and will save you so much time rather than having to piece together complicated Egyptian Hieroglyphics just so you can just build a bookcase!

Hard Hat News is a regional trade paper for the heavy construction, road building and excavating contractors in the Northeast, mid-Atlantic and Great lakes regions of the US. Jam-packed with the most complete listings of used equipment, auctions and more! Hard Hat News also sponsors the New York Hard Hat Expo, the largest construction show east of the Mississippi!


Ted’s Woodworking іѕ the brainchild οf Ted ‘Woody’ Mcgrath, who іѕ a member οf the Architectural Woodwork Institute(AWI), a woodworking professional аnԁ teacher. Hе сrеаtеԁ Ted’s Woodworking program fοr people Ɩіkе hіm, people that hаνе a trυе passion fοr the art οf woodworking. Hе understands the the creative instinct fοr working wіth wood іѕ аn art аnԁ a craft, nοt јυѕt a hobby. Hе аƖѕο realizes that many woodworkers wουƖԁ benefit frοm having the knowledge that hiѕ lifetime οf experience enables him to know. Bу mаkіnɡ Ted’s Woodworking available tο the public, hе hopes tο expand the horizons аnԁ creativity іn those who share hіѕ common passion аt heart.
As you can see in the image, this shelf goes on both sides of the corner wall. It looks beautiful and can be used to organize books, trophies, pictures frames and many other things. The strength and design of the shelf depends on how properly you build it. First time workers definitely need some guidance to help them with the process. Therefore, I am including this basic video that I found on YouTube that demonstrates the process of making corner wall wooden shelves.
This is not exactly a tutorial, but a guide to some really cool woodworking projects. Although we are not teaching you to make anything, we are always here to help. Feel free to ask your queries in the comments in case if you face any issue while working on any of these projects. Also, tell us how much you liked this article. Did you enjoy reading it? Did you work on any of these projects, and if yes, how was your experience? You are also welcome to share any images of your completed woodwork projects.

All you need to do is to send us a ticket in the member area to request for the project. Do include photos as well as the relevant details. Our workshop will take about 2 months to draft up a complete plan for you. Whats more, you’ll get access to plans every month which were requested from other members! You’ll never run out of ideas or inspiration for your next project.
Knowing what materials one needs fοr a рƖаn іѕ a critical step іn completing high quality wood projects, bυt Teds Woodworking give carpenters more than јυѕt that. Another expensive trapping fοr amateur woodworker’s іѕ the difficulty οf understanding what tools are necessary tο complete a project. Teds woodworking offers comprehensive tool explanations іn conjunction wіth projects ѕο one саn cultivate a trυе understanding οf what tools аrе needed fοr particular jobs. Bу increasing tool knowledge аnԁ confidence toward purchasing materials, Teds Woodworking better prepares еνеrу level οf carpenter fοr a more enjoyable аnԁ efficient project workflow.
Ted’s Woodworking іѕ the brainchild οf Ted ‘Woody’ Mcgrath, who іѕ a member οf the Architectural Woodwork Institute(AWI), a woodworking professional аnԁ teacher. Hе сrеаtеԁ Ted’s Woodworking program fοr people Ɩіkе hіm, people that hаνе a trυе passion fοr the art οf woodworking. Hе understands the the creative instinct fοr working wіth wood іѕ аn art аnԁ a craft, nοt јυѕt a hobby. Hе аƖѕο realizes that many woodworkers wουƖԁ benefit frοm having the knowledge that hiѕ lifetime οf experience enables him to know. Bу mаkіnɡ Ted’s Woodworking available tο the public, hе hopes tο expand the horizons аnԁ creativity іn those who share hіѕ common passion аt heart.
Some tools that are required for this project are Miter saw, drilling machine, pencil, tape measure, screws, etc. Those, who prefer a video tutorial instead, can visit the below link to a YouTube video tutorial that illustrates the process of creating a DIY Beer Bottle Crate. The video tutorial explains every step properly so that anyone can make a Beer bottle crate easily.
Let's assume 0.5% of people who visit buy the plans. People generally refer to such percentages as "conversion rate". Ted's affiliate page actually claims a 10% conversion rate, but I see no reason to believe any of Ted's claims. At 100,000 visitors per month, a 1% conversion rate means 1000 sales per month, at $67 per sale, that's $67,000 (67k) per month, or $804k per year. If all those sales were affiliate sales, Ted would only keep about $200k per year. But I would expect that at least a third of Ted's sales are not affiliate sales. Affiliates boost Ted's page on Google, but they don't get paid for that. So if one third of Ted's sales are thru search engines, Ted would keep the $22k for those. Paying 75% commission on the remaining 44k would leave Ted a total of $33k per month, or $396k per year. A lucrative scam, even by conservative estimates.
Some tools required for this project are hole saw, drilling machine, pencil, tape measure, clamps, etc. This tutorial explains every step properly with images so that anyone can make a wooden sofa sleeve easily. Those, who prefer a video tutorial, can visit the below link to a YouTube video that illustrates the process of building a DIY Sofa Sleeve Cupholder.
The plan was presented in a simple and efficient way such that anybody can easily understand and implement what it contains. The producer was himself a trainer and a member of the Architectural Woodwork Institute. Thus, he has an advantage over other trainers. It is obvious that it is not easy for anybody who is not committed to the profession to come out with that fantastic plan. He devoted his time and effort to ensure that he developed the plan, which is currently the best that woodworkers can actually lay their hands on the market today.

Sure, you could plop a couple of deck chairs in your backyard for an impromptu sitting area. But a hand-built cedar bench, framed by an arbor, gives you a more permanent place to kick back as the weather warms up, and adds an elegant architectural feature. Our design incorporates classic touches such as profiled rafter tails, alternating wide and narrow boards for the seat and backrest, and trellis sides to let your favorite climbers ascend to the overhead structure. Or you can let the bench remain free of greenery—it's eye-catching enough on its own.


Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.
Prices, promotions, styles, and availability may vary. Our local stores do not honor online pricing. Prices and availability of products and services are subject to change without notice. Errors will be corrected where discovered, and Lowe's reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions including after an order has been submitted.
So far, I considered this just a nuisance, until a spammer sent an email entitled "16,000 Woodworking Plans and Projects", claiming to be from "Wood Gears", with the return email address of woodgears.ca@gmail.com (not my email address). The mailing address included was for 750 Hornby Street, Vancouver BC. Googling that, it's the address of the Vancouver art gallery. I doubt the art gallery has anything more to do with this scam than I do.
Wonder how much Festool is paying Silva to showcase their outrageously expensive line of tools. He used practically the entire product line on this project that was nothing more than a Festool commercial. I guess the brad nailer company didn't offer any kickbacks to the crew because you never saw their brand name. This show has turned into nothing more than crass commercialism. And when did Silva become a 'master carpenter'. He can't hold a candle to Abrams. Never could. But he's definitely better at milking the sponsors. Would love to see the inside of his workshop.

Builder provides diversified content for builders - targeted to address how their businesses are doing. Builder sources are the best in the industry: the brightest, most esteemed economists, building scientists, and industry consultants. The greatest resource of all is other builders who provide real life, on the ground details about every aspect of their businesses, good and bad, and who offer their own experiences to help you when you need it.
DoItYourself.com®, founded in 1995, is the leading independent home improvement and repair website. We welcome your comments and suggestions. All information is provided "AS IS." Website operating problems contact [email protected] Questions of a Do It Yourself nature should be submitted to our "DoItYourself.com Community Forums". Copyright © 1995-2018 MH Sub I, LLC dba Internet Brands. All rights reserved. You may freely link to this site, and use it for non-commercial use subject to our terms of use. View our Privacy Policy here.
Hard Hat News is a regional trade paper for the heavy construction, road building and excavating contractors in the Northeast, mid-Atlantic and Great lakes regions of the US. Jam-packed with the most complete listings of used equipment, auctions and more! Hard Hat News also sponsors the New York Hard Hat Expo, the largest construction show east of the Mississippi!  

The plans have information of all the projects and kits that you need to become a professional. These kits and projects are great because it gives you fascinating ideas for those things that you need to get your job done very fast and done very well. Even if you are planning to carry out a new project, it will provide you with all information that you need to get started and excel. It contains lots of information including well over 16000 systematic guides for different kinds of woodworking projects including the ones known to you and those that you do not know of. The projects contain detailed designs as well as the instructions on how to go about them. This is good for carpenters and woodworkers because it makes their jobs much easier and better for them. When you use the plan, you are going to see the joy in woodworking because even novice can become experts within a short time. It thus would save you both time and money and you are going to do the job better and faster.
I have been aware of "Ted's woodworking" with his "16,000 woodworking plans" for some time. From time to time I get emails from people who want to buy an ad on my website to try to sell the plans. If I have the sense that they are new to advertising, I point out that I don't take ads for the "16,000 woodworking plans" scam in my initial response, because that's usually what they are trying to sell.
Ted’s Woodworking plans are not uniform in style. This is just a minor nit, but it would have been nice to have a uniform presentation style for all these plans. Also, the woodworking plans should have beginner, intermediate, and expert ratings. Instead, the plans are presented as is. A novice woodworker might have trouble with some of these plans.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
All users get a free DWG/CAD Plan Viewer. This tool provides you with the required means to view as well as measure DXF, DWG and DWF. Additionally, you also get XRef support which helps the user view block attributes as well layers. This makes it much easier to visualize your finished product even before it is done. The easy to use features also help users create their own projects and plans. So, once you feel you have got the drift of things, you can go well beyond the provided plans.

Making an art or a design on a wooden piece is a hectic task and requires good art skills. But there is another much easier way to carve a beautiful art on any wood surface. For this, you will need the image or graphic that you want to transfer, a piece of wood, freezer paper, etc. I, myself have made several such designs. At the source below, you can find a step by step guide for transferring a graphic image to the wood.


By video tutorial, you will get step by step process instructions of making a nice wooden folding sling chair from scratch. However, my first wooden chair was not the best one, but it was good enough to motivate me to make some more folding chairs like this one. If I can make this, you too can make one yourself. You can browse the internet for more folding sling chairs ideas and start making one now.
On review, it's apparent that Ted's Woodworking (and woodprix.com) is a clever sort of scam. Basically, whoever it is behind ted's woodworking and woodprix.com encourages affiliates to sell the plans, paying 75% commission on a $67 "product". That sounds very attractive, especially if you believe the claims about conversion rate (percentage of people who buy) on the site. Enough people believe the get rich hype and sign up as affiliates to try to sell the plans. This creates a huge number of affiliates. Each affiliate, in turn, creates links back to Ted's Woodworking, which raises Ted's profile to Google, and makes tedswoodworking.com the second search result on Google (after ads) when searching for "woodworking plans". Even affiliates that never sell a single copy help boost Ted's page on Google. And if you find Ted's Woodworking using a Google search, Ted doesn't have to pay anybody a commission. So even affiliates that never sell a single copy help Ted. I suspect the primary motivation for having affiliates is to boost Ted's page, rather than generating affiliate sales. With 80% commission, direct sales are 5x as valuable to Ted as affiliate sales.
Wall-mounted or placed on a table or countertop, this handsome display cabinet is the perfect way to share any collection while keeping it clean and protected at the same time. Featuring tempered glass doors and three shelves, the cabinet’s design calls for all straight cuts and straightforward construction techniques (simple cut-outs give the effect of 

You'll probably want a nice place to plant yourself for the best view of your landscape. Building yourself a simple but comfy bench, and position it in a shady spot—a place to take leisurely breaks. If you're good with a jigsaw, it's not difficult to make a nice contoured one with simple horizontal slats. A well-placed bench will be a welcome respite for the constant gardener, or any visiting admirers.
 If you really want to see if any of these people are woodworkers or just plain scammers, check they out, they NEVER show anything they have built from the plans, they only ever talk about it which proves another point, they are not woodworkers, they are scammers ... so don't be fooled, there are thousands of good FREE PLANS all over the Internet and there are thousands more plans offered for a small amount of money, and the plans where you actually pay something are almost always much better than the free plans, so don't be afraid to pay someone for their time and efforts ... you will get a much better plans and much better results.
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.
Finding a toolbox for a mechanic, for his hand tools, is not a big challenge at all - there are dozens of the tool boxes available on the market, from huge roll-around shop cases to small metal boxes. Plumbers, electricians, and farmers are well served, too, with everything from pickup-truck storage to toolboxes and belts. But, if you are a shop-bound woodworker then the case changes. You get to need a tool box that suits the range and variety of hand tools that most woodworkers like to have. For those who deny making do with second best, there's only one solution, you’ve to build a wooden toolbox that should be designed expressly for a woodworking shop.
While many customers are satisfied that they have a go-to resource for woodworking plans, not all will find all the plans helpful and others may think that they can get better quality videos and instructions from other sources. It all depends on what you are looking for and how willing you are to spend money on the right woodworking resources. Whether you find that this product meets your needs or not, it is always important to do your due diligence when purchasing this or any other product.
This is one of those things that you never know you need unless you have one. This amazing wooden sofa sleeve works perfectly on either or both sides of a sofa set. It gives your sofa a nice look. The sleeve can also be modified to include a cup holder, mobile holder, etc. You can easily find this item on any online furniture store, but an even better idea is to build one. This way, you can make a sofa sleeve design that you actually like and make space for cup and other things.
For your kitchen, it can work as a knife rack. It gives you easy access to all essential tools while saving space. In addition, it adds a nice visual appeal to your kitchen wall. You can customize your wall rack with different materials, designs and styles. I am here sharing the source link to the step by step tutorial about how to make a rustic wall knife rack.
A lot of woodworkers share their projects through their own blogs or YouTube channels. In fact, we’ve shared many of them here before, including, Woodworking for Mere Mortals, The Wood Whisperer, Matthias Wandel, April Wilkerson, Sawdust Girl, House of Wood, FixThisBuildThat, Pneumatic Addict, Build-Basic, Rogue Engineer, Her Tool Belt, and Ana White. The best YouTube woodworkers create great videos, but also provide a complete blog post with a cut list, tools, materials, and instructions. Find your favorites and save them for when you’re doing your searches.
Your garden tools need a clean, dry, and accessible locale to keep safe from natures elements. A smart option is to build a handsome wood lean-to shed against the house near the patio or garden. If it's made from cedar, a naturally rot-resistant wood, it will weather nicely while protecting your goods from precipitation and insects alike. You can make one in a weekend out of off-the-shelf lumber or buy a panelized kit that screws ­together in under an hour.
Isn’t this amazing that instead of having to throw that old furniture piece away, you can now reuse it to build something even more beautiful? If you do not like this particular idea, there are many other re-purposeful furniture items you can build from an old dresser. Just search the internet for other DIY project ideas. Here is a link to the video tutorial that explains the same procedure in a more practical manner that you can easily follow through.
We have helped thousands of general and specialty contractors of all types build stronger, more profitable businesses. Sign up for our free newsletter and receive advice and encouragement for your business. We offer affordable DVD training in estimating, sales and business management, along with estimating and proposal writing software that doesn’t cost an arm and a leg. Free Online Catalog for US addresses only.
Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary.
Just like any other product, Teds Wood Working is not perfect, nor is it the ultimate woodworking resource out in the market. With its sheer number of plans, you are bound to find a few plans that will not appeal to some users. However, unsatisfied customers are always free to request for refunds. Delays in meeting customer complaints may vary from one location to another, but most customer complaints are eventually resolved with the ultimate goal of ensuring customer satisfaction.

Drill four 5/8-in.-dia. 1/2-in.-deep holes on the large disc?inside the traced circle?then use 5/8-in. dowel centers to transfer the hole locations to the underside of the small disc. Drill four 1/2-in.-deep holes on the underside of the small disc and a 1/2-in.-deep hole in the center of the top for the dowel handle. Glue in the dowels to join the discs, and glue in the handle. We drilled a wood ball for a handle knob, but a screw-on ceramic knob also provides a comfortable, attractive grip.

So the way it works is you’re going to enter your credit card information on the next page. After that, you’ll get instant access to the package. It’s kind of a membership site, but don’t worry about a monthly membership fee or anything like that. You will pay only once and that’s all you pay. There’s no additional charges, no hidden charges, no nothing like that. For a small fee I will also ship worldwide, the DVDs of all the plans and bonuses. 

Even if you want to start your own woodworking business, the book has a section devoted to that. It even contains information on how to manage your money in the business. It provides all the information that you need to set the business and have that business running on the highest scale. It teaches you the procedure that you need to get licenses as well as well how best to contract your jobs. It contains information on getting supplies to your business partners. You are going to learn how to beat your competitors in that business.

There are different technicalities that are involved in the woodworking business. For you to become an expert, you must be familiar with laminating, bonding, jointing, as well as fastening. It contains different blueprints that will help you to transform your work. It contains everything that you need for you to become the best professional in the industry.
Need is a place to sit quietly and contemplate the sounds of nature? Birds chirping, breezes blowing, brooks babbling... What—no backyard brook? Not a problem. Just build yourself the next best thing, with a softly trickling garden fountain. The project is nothing to get stressed about. In a mere weekend, you can fountain-ize most any leftover garden ornament, turning it into an enduring monument to tranquility.
Take a scenic drive through the back roads of New England and you will inevitably spot some of the 240,000 miles of stone walls built by 19th-century farmers trying to delineate their land. You may not have a large plot to mark off, but your patios and flower beds are still deserving of a border, and one that doubles as a place to sit down will make your landscape all the more enjoyable. But no need to dig up the yard looking for rocks like the Yankee farmers had to. A wall built from cast concrete blocks made to look like stone is just as beautiful and much easier to build—especially when your "planting season" is confined to the weekends.
Just like any other product, Teds Wood Working is not perfect, nor is it the ultimate woodworking resource out in the market. With its sheer number of plans, you are bound to find a few plans that will not appeal to some users. However, unsatisfied customers are always free to request for refunds. Delays in meeting customer complaints may vary from one location to another, but most customer complaints are eventually resolved with the ultimate goal of ensuring customer satisfaction.
Sure, you could plop a couple of deck chairs in your backyard for an impromptu sitting area. But a hand-built cedar bench, framed by an arbor, gives you a more permanent place to kick back as the weather warms up, and adds an elegant architectural feature. Our design incorporates classic touches such as profiled rafter tails, alternating wide and narrow boards for the seat and backrest, and trellis sides to let your favorite climbers ascend to the overhead structure. Or you can let the bench remain free of greenery—it's eye-catching enough on its own.
Teds Woodworking Plans contains more than 16,000 different diagrams and enables individuals who are new to woodwork, or are experienced in the craft, to develop their skills and new brand new techniques. The website's database is enormous, with many different videos, CAD software, blueprints, and diagrams, which can cater to a number of different demographics, no matter what their age or background.
I got this idea from a Pinterest post. The final product looks so beautiful that I just couldn’t wait to make one for myself. This was somewhat a different experience from my other regular DIY projects as it doesn’t involve making something from scratch, but turning an existing wood piece into another one. Nonetheless, I enjoyed it very much and the final product was very satisfying. The tutorial I used is linked below.

With Teds Woodworking Plans, it is quite easy for anyone to build some really nice pieces of furniture following easy woodworking plans because you can’t really go wrong. You can be the worst woodworker in the world but if you have a simple step by step plan that you can follow you can create a decent piece of furniture. Obviously it may not turn out perfect at first but that will come with practice. When you get to the stage where your skillful enough you can then start to come up with your own plans. Which will make the craft of woodworking a lot more fun for sure!
Here’s a traditional Swedish farm accessory for gunk-laden soles. The dimensions are not critical, but be sure the edges of the slats are fairly sharp?they’re what makes the boot scraper work. Cut slats to length, then cut triangular openings on the side of a pair of 2x2s. A radial arm saw works well for this, but a table saw or band saw will also make the cut. Trim the 2x2s to length, predrill, and use galvanized screws to attach the slats from underneath. If you prefer a boot cleaner that has brushes, check out this clever project.
Just make sure to use non-toxic wood and non-toxic finishes like Raw Linseed Oil or Carnauba Wax so that dangerous chemicals from other woods and finishes doesn’t contaminate the food that goes onto the cutting board. You can also opt to include an indent for the knife, so the chef can put the knife into the cutting board when the knife is not currently in use.
@Neil What is the use of repeating lessons when there is so much more to be learned? Technology has moved on from the adz. Plumbers use PEC, insulation is sprayed, glue-lams allow for open floor plans and furnaces are no longer stoked with coal. As for the new people, if these trades cannot attract fresh blood we will all be unable to get homes built and repairs made. I don't yearn for my first home with the leaky concrete block foundation, failing well pump and an oil furnace held up by the plenum. I'll take heat pumps, solar panels and PVC waste pipes any day.You can get all the sill plate repairs and flitch beams demos you need on YouTube.
×