The obvious thing to do would be for the copyright holders to sue "Ted" to get him to stop selling these plans. But that would require the copyright holders to spend money on lawyers and some investigation to find out who "Ted" actually is. The actual address on "Ted's" website doesn't exist, and the image of Ted is a stock photo. Even if successfully sued by one copyright holder, "Ted" could just remove the offending plans and keep selling.

Working on one side at a time, glue and nail the side to the back. Apply glue and drive three 1-5/8-in. nails into each shelf, attach the other side and nail those shelves into place to secure them. Clamps are helpful to hold the unit together while you’re driving nails. Center the top piece, leaving a 2-in. overhang on both sides, and glue and nail it into place. Paint or stain the unit and then drill pilot holes into the top face of each side of the unit and screw in the hooks to hold your ironing board. Mount the shelf on drywall using screw-in wall anchors.
The logo suggests the consumer is buying a DVD filled with blueprints and videos for over 16,000 projects. A DVD would be a one-time purchase that can be referenced far into the future. In reality, the buyer only gets access to projects on Ted’s website for a limited amount of time unless they upsell to a monthly subscription. I’ve seen other complaints stating there are nowhere near 16,000 projects on the site, and all the plans and videos could be found elsewhere on the Internet for free or for purchase.
I have been aware of "Ted's woodworking" with his "16,000 woodworking plans" for some time. From time to time I get emails from people who want to buy an ad on my website to try to sell the plans. If I have the sense that they are new to advertising, I point out that I don't take ads for the "16,000 woodworking plans" scam in my initial response, because that's usually what they are trying to sell.

The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?


Nightstands are nearly almost as important as the headboard of a mattress when it comes to a bedroom. They are absolutely perfect for placing lamps and novels for that late night reading, an alarm clock to remind you when it should be time to start your day, and for that nice, coaxing mug of sleepy time tea when you decide it is time to start winding down.
​Every project needs some tools and material to build on. The tools and material you will need in this plan include Miter saw, jigsaw, measuring tape screws and screwdriver etc. We will suggest you take high-quality material for the plan. Read the source tutorial and watch the video tutorial below for more details. Follow all the steps properly to make a nice and strong Rustic cooler. The tutorial explains the procedure for building this awesome gift. Make sure to use the only high-quality material for any woodworking project.
Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many
BOISE, Idaho, May 12, 2018 (GLOBE NEWSWIRE) -- TedsWoodworking.com has over 16,000 woodworking plans and projects. If you want to start a woodworking project, you need all the necessary information, including schematics, blueprints, material lists, dimensions etc. That is where TedsWoodworking comes in. The plans are clearly drawn and they're step-by-step explanations of how the plan should be done and put together.

On review, it's apparent that Ted's Woodworking (and woodprix.com) is a clever sort of scam. Basically, whoever it is behind ted's woodworking and woodprix.com encourages affiliates to sell the plans, paying 75% commission on a $67 "product". That sounds very attractive, especially if you believe the claims about conversion rate (percentage of people who buy) on the site. Enough people believe the get rich hype and sign up as affiliates to try to sell the plans. This creates a huge number of affiliates. Each affiliate, in turn, creates links back to Ted's Woodworking, which raises Ted's profile to Google, and makes tedswoodworking.com the second search result on Google (after ads) when searching for "woodworking plans". Even affiliates that never sell a single copy help boost Ted's page on Google. And if you find Ted's Woodworking using a Google search, Ted doesn't have to pay anybody a commission. So even affiliates that never sell a single copy help Ted. I suspect the primary motivation for having affiliates is to boost Ted's page, rather than generating affiliate sales. With 80% commission, direct sales are 5x as valuable to Ted as affiliate sales.
This program is suitable for anyone who loves woodworking. If you are taking woodworking as a new hobby, or someone who prefers to make your own furniture, you will love the variety of options that the product offers. This is also great for homeowners who are refurbishing their homes with furniture and other items from scratch to save on costs. Old furniture that would otherwise end up in the scrap bin can be refurbished and given new life especially if you use the woodworking plans for refurbishing or up-cycling old pieces of wood or wooden furniture.
Just make sure to use non-toxic wood and non-toxic finishes like Raw Linseed Oil or Carnauba Wax so that dangerous chemicals from other woods and finishes doesn’t contaminate the food that goes onto the cutting board. You can also opt to include an indent for the knife, so the chef can put the knife into the cutting board when the knife is not currently in use.
So it all comes down to you where you get your woodworking plans from, you can literally find thousands of them on the net but of course not all of them will be accurate as I have experienced myself. It’s more likely that you will find a really good plan for your new project if you examine a decent book about the woodworking craft. It’s great for reading up on certain topics such as woodworking but it can be a bit overwhelming when trying to find something as specific as easy woodworking plans because there is a lot of choice and this is where Teds Woodworking Plans can help you.
This is not exactly a tutorial, but a guide to some really cool woodworking projects. Although we are not teaching you to make anything, we are always here to help. Feel free to ask your queries in the comments in case if you face any issue while working on any of these projects. Also, tell us how much you liked this article. Did you enjoy reading it? Did you work on any of these projects, and if yes, how was your experience? You are also welcome to share any images of your completed woodwork projects.

Another awesome thing about this coffee table is that it is also has a storage unit. So you can store drinks, and other stuff in the half barrel of your table and then close or open it whenever you need. Pete has also constructed a video for this tutorial for which you can find the link below. It illustrates the same process in a video guide that shows you the exact process to be followed while building this whiskey barrel coffee table.
Furnishing and decorating your patio is not an easy task – but then again, it has to be done! Your patio is obviously one of the most important rooms in your home, as you can easily turn it into your little piece of Heaven, your “safe spot” in your home where you can retreat whenever you want to ignore the world and just spend some time alone all by yourself.
Another wooden item that I love very much is a beautiful mobile holder. You can see one in the image below. These things are not only beautiful, but they can comfortably hold any sized mobile and ensure proper safety. Another amazing thing is that they can be built in many shapes and sizes, as and how you need it. You can see some more examples at the source below
Making a garden arched footbridge out of some wood boards can be fun, hard working plan and also it’s quite rewarding. We are providing the project tutorial for how to build an arched footbridge without rails or having rails. If you take your hands of work and have some basic woodworking skills you can easily build this type of bridge. While this garden bridge is too small to walk over but it can make a really stunning addition to your lush yard or garden.
You can also make one for elders and put it in your garden or terrace or anywhere in the house. Elders can use it to relax and kids can use it to play or sleep. Although this is a really beautiful piece of woodwork, it is not that easy to make. Only someone with good woodworking skill can think of making this swing set. Also, I couldn’t find a good tutorial that illustrates the process of building a wooden boat-shaped swing set. Most Probably, I will write one when I build mine.But if you really want this swing set like right now, I would suggest you hire a good woodworker, who can build something similar. Or just search the internet and maybe you get lucky enough to find a tutorial for this. Good luck either way. 

This is one of those things that you never know you need unless you have one. This amazing wooden sofa sleeve works perfectly on either or both sides of a sofa set. It gives your sofa a nice look. The sleeve can also be modified to include a cup holder, mobile holder, etc. You can easily find this item on any online furniture store, but an even better idea is to build one. This way, you can make a sofa sleeve design that you actually like and make space for cup and other things.

The items you’ll need for this project include wood board, power drill, tape measure, adhesive, etc. Read the tutorial for details. Follow the steps properly to make a nice and strong wall rack. This rack makes use of magnets to hold metal items. The tutorial explains the procedure for building this beautiful wall rack. Make sure to use only high quality items for any woodworking project. Use the rack only to hang items that are not too heavy for the magnet to hold. Also, be careful while working around this wall rack and beware of the knives falling off the rack.
Relax and enjoy your outdoor space with this smart patio combo consisting of a sofa and chair. You can adjust the size completely to make it fit perfectly onto your patio or deck, and both the sofa and chair have arms that double as trays for al fresco dining. And you can make your own cushions to fit, or use shop-bought ones and add your own ties, if necessary.
The program is wonderful and it is not difficult for anybody to use it. You have seen that anybody can use the plan irrespective of whether you are a beginner or an experienced woodworker. There are designs available in the plan for anybody. It can be used by anybody irrespective of your previous working experience. When you use the program, you are sure that you are going to do a better job than somebody who is not using the system. The program is good for anybody whether you want to use it as a means of livelihood or you want to use it as a hobby. Whichever way you want to use the system, you are going to achieve a good result.
The plans range from simple items like basic tables and chairs to more artistic creations such as jigsaw puzzle tabletops, wooden animal centerpieces, plans for upcycled wooden palette furniture, wooden clocks, hidden storage, garage plans and even plans for working musical instruments like guitars. With basic woodworking know-how, anyone can come up with interesting wooden creations with these plans.
Although refrigerators long ago rendered them obsolete, antique oak ice boxes remain popular with collectors, even though they’re expensive and hard to find. This do-it-yourself version is neither: it’s both inexpensive and easy to build. An authentic reproduction of an original, the project is especially popular when used as a bar, but it has many

I am sharing here a link to the detailed tutorial written by Pete at diypete.com, who shares the step by step process for making a wonderful barrel coffee table from scratch. He also tells you what items you’ll need for this project and where to find them. For example, you can buy an old whiskey barrel online or from a local whiskey store for a few bucks, if you haven’t already got one.
Another awesome thing about this coffee table is that it is also has a storage unit. So you can store drinks, and other stuff in the half barrel of your table and then close or open it whenever you need. Pete has also constructed a video for this tutorial for which you can find the link below. It illustrates the same process in a video guide that shows you the exact process to be followed while building this whiskey barrel coffee table.
Peter went on the Internet looking for some woodworking plans, hoping to find a birthday present for his brother. He stumbled upon Tedswoodworking.com. He was amazed at the products available on the Teds Woodworking website. Teds Woodworking has over 15,000 projects and woodworking plans. He signed on, and saved so much money – it was unbelievable. He wanted to build an outdoor set, but never really knew how to do this, or could never really follow the plans. So, he was able to do that from Ted’s Woodworking. Peter got all the blueprints, the plans, the materials list, full color pictures, easy to follow, everything was detailed, and understandable to him, especially since he’s a visual guy. He has a hard time with written instructions.  Also, he signed up for Ted’s free bonuses, which includes a CAD plan viewer, and using this, he can design his own furniture, on his own computer. It was so inexpensive for all this, and overall an unbelievable price for the set. Also included were 150 woodworking videos, so he now has a guided instruction set for 150 different pieces of furniture to build. He’s very happy to have found tedswoodworking.com online. Once you see everything on the site, you’ll either buy this package for yourself, or as a gift for a family member or a friend.
×