Just like any other product, Teds Wood Working is not perfect, nor is it the ultimate woodworking resource out in the market. With its sheer number of plans, you are bound to find a few plans that will not appeal to some users. However, unsatisfied customers are always free to request for refunds. Delays in meeting customer complaints may vary from one location to another, but most customer complaints are eventually resolved with the ultimate goal of ensuring customer satisfaction.
Begin by cutting off a 10-in. length of the board and setting it aside. Rip the remaining 38-in. board to 6 in. wide and cut five evenly spaced saw kerfs 5/8 in. deep along one face. Crosscut the slotted board into four 9-in. pieces and glue them into a block, being careful not to slop glue into the saw kerfs (you can clean them out with a knife before the glue dries). Saw a 15-degree angle on one end and screw the plywood piece under the angled end of the block.
×