Here, Ron discusses his experience with Ted’s Woodworking. Having used the package for over two months, Ron feels this is a worthwhile investment. There is a wide range of woodworkers that could benefit from Ted’s Woodworking, from the beginner to the seasoned professional.  There is information on every subject in woodworking, ranging from what kind of wood to use, to joining the pieces together, to finishing the pieces. You’ll find all the information is in this package. Ron points out there are many plans for every type of woodworking project, whether it’s a small toy, to a large piece of furniture, or a wine rack, or a gazebo or outdoor shed. Ron endorses this useful woodworking package.

Some tools required to build a picture frame are a table saw, miter saw, measuring tape, wood glue etc. A table saw with a backing board and miter gauge can be used to get the right angle and lengths of picture frame every time. You can use builders square to arrange the final cut pieces before nailing, screwing or gluing. Check out the video tutorial below for more details.


Just make sure to use non-toxic wood and non-toxic finishes like Raw Linseed Oil or Carnauba Wax so that dangerous chemicals from other woods and finishes doesn’t contaminate the food that goes onto the cutting board. You can also opt to include an indent for the knife, so the chef can put the knife into the cutting board when the knife is not currently in use.
All images and tutorials on this blog are copyrighted material.Please contact me if you would like to borrow any media (photos, video or audio files), tutorials, or ideas from this blog. 99% of the time I would be happy to allow you to use one photo with appropriate credit and link back to PrettyHandyGirl.com (preferably to the same post it was borrowed from.) I can be contacted via email: PrettyHandyGirl (at) gmail.com.
Nobody says you have to build your own porch swing. You could buy one, costing hundreds of dollars. But wait. Why not make it yourself and save some cash? Were you crafty enough, you could start from scratch... But let's also say you're willing to hit the halfway mark between scratch-built and store-bought. For this building project, we selected a 5-foot-long swing made of solid teak. No cutting is needed, so assembly takes only a few hours. And the effort is doubly repaid: in savings and in satisfaction.
With a pencil and a protractor, divide the larger disc into 30-degree wedges to create 12 center lines for the bottle indents. Center and trace the smaller disc on top of the larger disc. Next, with a drill press, drill 3/8-in.-deep holes on the 12 center lines with the 1-7/8-in. Forstner bit, spacing them between the disc’s outer edge and the traced circle. Next, divide the smaller disc into 60-degree wedges and drill six more 3/8-in.-deep holes with the Forstner bit.
BOISE, Idaho, May 12, 2018 (GLOBE NEWSWIRE) -- TedsWoodworking.com has over 16,000 woodworking plans and projects. If you want to start a woodworking project, you need all the necessary information, including schematics, blueprints, material lists, dimensions etc. That is where TedsWoodworking comes in. The plans are clearly drawn and they're step-by-step explanations of how the plan should be done and put together.
I have been aware of "Ted's woodworking" with his "16,000 woodworking plans" for some time. From time to time I get emails from people who want to buy an ad on my website to try to sell the plans. If I have the sense that they are new to advertising, I point out that I don't take ads for the "16,000 woodworking plans" scam in my initial response, because that's usually what they are trying to sell.
​Luckily, we have also managed to find a detailed video tutorial of the Barn door project that illustrates the process of building a Barn door of your own. The steps and instructions in the video tutorial are different from the source links listed above. Actually, you can make different types of designs for your Barn door depending on which one you can afford easily and DIY on your own.
Aside from the privacy it offers, a latticework porch trellis is a perfect way to add major curb appeal to your home for $100 or less. The trellis shown here is made of cedar, but any decay-resistant wood like redwood, cypress or treated pine would also be a good option. Constructed with lap joints for a flat surface and an oval cutout for elegance, it’s a far upgrade from traditional premade garden lattice. As long as you have experience working a router, this project’s complexity lies mostly in the time it takes to cut and assemble. Get the instructions complete with detailed illustrations here.
The best thing about the toy chest is that it is very easy to build. All you need is the basic understanding of woodworking and a few tools to get started. You can also modify your kid’s toy chest in any way you want or build in a different design or color different from the one pictured above. You can try some other designs for your plan in the below-mentioned link.
Another awesome thing about this coffee table is that it is also has a storage unit. So you can store drinks, and other stuff in the half barrel of your table and then close or open it whenever you need. Pete has also constructed a video for this tutorial for which you can find the link below. It illustrates the same process in a video guide that shows you the exact process to be followed while building this whiskey barrel coffee table.
This is one of those things that you never know you need unless you have one. This amazing wooden sofa sleeve works perfectly on either or both sides of a sofa set. It gives your sofa a nice look. The sleeve can also be modified to include a cup holder, mobile holder, etc. You can easily find this item on any online furniture store, but an even better idea is to build one. This way, you can make a sofa sleeve design that you actually like and make space for cup and other things.
Builder provides diversified content for builders - targeted to address how their businesses are doing. Builder sources are the best in the industry: the brightest, most esteemed economists, building scientists, and industry consultants. The greatest resource of all is other builders who provide real life, on the ground details about every aspect of their businesses, good and bad, and who offer their own experiences to help you when you need it.

Just like any other product, Teds Wood Working is not perfect, nor is it the ultimate woodworking resource out in the market. With its sheer number of plans, you are bound to find a few plans that will not appeal to some users. However, unsatisfied customers are always free to request for refunds. Delays in meeting customer complaints may vary from one location to another, but most customer complaints are eventually resolved with the ultimate goal of ensuring customer satisfaction.
An ideal resource for woodworkers looking for a new project or wanting to spruce up their home! From kitchen improvements and storage solutions to classic furniture in the Craftsman and Adirondack styles, the experts at American Woodworker have provided plans and instructions for building 50 great-looking projects that will improve every space inside and outside your home.
This is definitely going to be one of the easiest woodworking projects you’ll be reading about today. So why not just get started? The tutorial link is given below. Just do exactly what they are saying in the tutorial and you will end up making a beautiful wooden doormat just like the one in the image above. They are using pine wood to build this doormat. You can choose any wood material that best suits your budget.
Some tools that are required for this project are Miter saw, drilling machine, pencil, tape measure, screws, etc. Those, who prefer a video tutorial instead, can visit the below link to a YouTube video tutorial that illustrates the process of creating a DIY Beer Bottle Crate. The video tutorial explains every step properly so that anyone can make a Beer bottle crate easily.
Hmmm.. that video link seems to be broken for me.. but a quick google search for “Ted’s woodworking fraud” turns up a LOT of hits, even from Matthias over at woodgears.ca ( http://woodgears.ca/ted/ ) and Steve Ramsey has a page devoted to him at WWMM ( http://www.woodworkingformeremortals.com/2012/04/teds-woodworking-fraud.html ). Someone even tried to find the address listed for them and it doesn’t exist: https://www.youtube.com/watch?v=I3rAcKT7NCw
Furnishing and decorating your patio is not an easy task – but then again, it has to be done! Your patio is obviously one of the most important rooms in your home, as you can easily turn it into your little piece of Heaven, your “safe spot” in your home where you can retreat whenever you want to ignore the world and just spend some time alone all by yourself.
Just make sure to use non-toxic wood and non-toxic finishes like Raw Linseed Oil or Carnauba Wax so that dangerous chemicals from other woods and finishes doesn’t contaminate the food that goes onto the cutting board. You can also opt to include an indent for the knife, so the chef can put the knife into the cutting board when the knife is not currently in use.
Whether you're new to woodworking or you've been doing it for years, Woodcraft's selection of woodworking projects is one the best places to find your next big project. Whether you're looking to make wooden furniture, pens, toys, jewelry boxes, or any other project in between, the avid woodworker is sure to find his or her next masterpiece here. Find hundreds of detailed woodworking plans with highly accurate illustrations, instructions, and dimensions. Be sure to check out our Make Something blog to learn expert insights and inspiration for your next woodworking project.

  Woodworking Pages     Deck Bench    Easels    Entertainment Centers    Firewood Racks    Fishing Rod Racks    Free Woodworking Catalog    Garages and Workshops    Garden Fence Gates    Greenhouses    Gun Cabinets    Houses    Hummingbirds    Index    Index for Resources    Kitchen Accessories    Lean To Sheds    Lumber Storage Racks    Marble Toys and Games    
This program is suitable for anyone who loves woodworking. If you are taking woodworking as a new hobby, or someone who prefers to make your own furniture, you will love the variety of options that the product offers. This is also great for homeowners who are refurbishing their homes with furniture and other items from scratch to save on costs. Old furniture that would otherwise end up in the scrap bin can be refurbished and given new life especially if you use the woodworking plans for refurbishing or up-cycling old pieces of wood or wooden furniture.
Another wooden item that I love very much is a beautiful mobile holder. You can see one in the image below. These things are not only beautiful, but they can comfortably hold any sized mobile and ensure proper safety. Another amazing thing is that they can be built in many shapes and sizes, as and how you need it. You can see some more examples at the source below

Ted's Woodworking is not really about woodworking plans. It's about getting money from people who should know better. The "plans" themselves are just enough to keep naive people from realizing it's a fraud so they don't ask for a refund. If you have fallen victim to this within the last 90 days, please go to ClickBank, or PayPal (or whoever processed the payment) and ask for a refund. The item is not as described, and what you got was pirated (illegal). That's reason enough for a refund.


Woodcraft is quite possibly one of the best forms of expressing the artist in. It looks so simple yet so intricate. It helps you reconnect with nature on a spiritual level. It is dangerously addictive as people who pursue this hobby have been known to spend hours at a time working on a simple project by using various woodworking tools and never quite know it.
Yes Seriously! You can build an easy bed frame yourself without any other’s help. As everyone knows the starting point of any bedroom is a gorgeous bed. However, you also need something that lets you enjoy peaceful slumber in comfort and warmth, but since the bed took as the focal point of the room, you may need something that looks really good too.
Teds Woodworking Plans contains more than 16,000 different diagrams and enables individuals who are new to woodwork, or are experienced in the craft, to develop their skills and new brand new techniques. The website's database is enormous, with many different videos, CAD software, blueprints, and diagrams, which can cater to a number of different demographics, no matter what their age or background.
The beauty of this project lies in the simplicity. All you need are 3 pieces of wood of your choice (though we must admit natural hardwoods will look incredible), sanding block, clamps, wood glue and finishing product. The hardest step of the whole tutorial is measuring – as always, measure 9 times, cut once! You wouldn’t want to finish your project and then realize it doesn’t have enough space to fit your DVD player, would you?
Every dollar spent on "Ted woodworking" is a dollar that could otherwise be spent on legitimate quality woodworking content, which would in turn encourage the development of more quality content. But aside from hurting producers, it also hurts the buyer. Whoever buys Ted's plans is no further ahead than they would be by searching for plans using Google. Arguably, they are further behind because they might waste time trying to use Ted's plans instead of finding better woodworking plans for free using Google.
The program is wonderful and it is not difficult for anybody to use it. You have seen that anybody can use the plan irrespective of whether you are a beginner or an experienced woodworker. There are designs available in the plan for anybody. It can be used by anybody irrespective of your previous working experience. When you use the program, you are sure that you are going to do a better job than somebody who is not using the system. The program is good for anybody whether you want to use it as a means of livelihood or you want to use it as a hobby. Whichever way you want to use the system, you are going to achieve a good result.
Ever since colonial-era homesteaders wove wattle garden structures from unbranched shoots of willow or hazel and set their peas to clamber over rows of tiny-twigged birch limbs, countless generations have used sticks to prop up their plants. Today, homeowners who want to combine beauty and ­utility can do the same. Connecticut gardener Thyrza Whittemore, reaches for branches pruned in early spring to construct a diamond-patterned trellis for her vegetable garden. Branches are close at hand, easy to fashion to the right size, biodegradable, and free.
TimberLine is a monthly trade magazine for the logging, sawmill, pallet, firewood and wood processing industries. Every month, TimberLine delivers information on machinery, safety, business opportunities, plant operations, company management, new products, general news, environmental issues and more. TimberLine helps readers learn about the latest technology, generate new business ideas, save $$$ on machinery/equipment and keep up with the latest breaking industry news.
On review, it's apparent that Ted's Woodworking (and woodprix.com) is a clever sort of scam. Basically, whoever it is behind ted's woodworking and woodprix.com encourages affiliates to sell the plans, paying 75% commission on a $67 "product". That sounds very attractive, especially if you believe the claims about conversion rate (percentage of people who buy) on the site. Enough people believe the get rich hype and sign up as affiliates to try to sell the plans. This creates a huge number of affiliates. Each affiliate, in turn, creates links back to Ted's Woodworking, which raises Ted's profile to Google, and makes tedswoodworking.com the second search result on Google (after ads) when searching for "woodworking plans". Even affiliates that never sell a single copy help boost Ted's page on Google. And if you find Ted's Woodworking using a Google search, Ted doesn't have to pay anybody a commission. So even affiliates that never sell a single copy help Ted. I suspect the primary motivation for having affiliates is to boost Ted's page, rather than generating affiliate sales. With 80% commission, direct sales are 5x as valuable to Ted as affiliate sales.
Need a place to store those beautiful flowers from a loved one or personal garden, but not a big fan of the giant, antique vase? I strongly recommend making a bottle vase holder! These easy to design, easy to make bottle vase holders are the perfect starter project for anyone new to the world of woodworking and looking for a project to help get them off the ground.
×